Selecting The Content Of Trace Acquisition - Renesas M16C/64 User Manual

R0E530640MCU00 User's Manual 5. Debugging Functions
5.9.7

Selecting the Content of Trace Acquisition

Select the content of trace information you want to be captured into trace memory. Use the Options page of the Trace
conditions dialog box to make this selection.
Figure 5.56 Trace conditions dialog box
Select which signal you want to be acquired from three choices available: Event Number, Task ID or External trigger. By
default, the Event number is selected.
CAUTION
If you want a history of trace execution to be displayed in trace acquisitions carried out by running a realtime OS program, be
sure to select Task ID.
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 132 of 229