Measuring Task Stack - Renesas M16C/64 User Manual

R0E530640MCU00 User's Manual

5.12.11 Measuring Task Stack

The Task Stack sheet shows the access information collected from a task stack.
Task stacks are automatically registered.
You cannot add, remove or change any task.
If tasks are changed pursuant to alterations of the user program, for example, the window is automatically updated.
Figure 5.124 Data Coverage window (task stack specification)
The Data Coverage window is vertically divided into halves by a splitter.
The upper area shows the automatically registered task stacks and access rates.
Table 5.39 Contents in the upper area of Data Coverage window
[Task]
[Access Rate]
The lower area shows detail information of the task stack selected in the upper area.
Table 5.40 Contents in the upper area of Data Coverage window
[Address]
[Label]
[Area]
[Data]
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 182 of 229
Task stacks (task ID, task entry label)
Shows access rates by a percentage and graph
Address value
Label name
Memory area (FlashROM, RAM, SFR)
This column is blank for unused areas.
Memory data
The accessed data has its background displayed in purple.
5. Debugging Functions