Detecting An Os Dispatch - Renesas M16C/64 User Manual

R0E530640MCU00 User's Manual
2. The Exception page shown below will appear. Click the Detail button to the right of the Task stack access violation check
box.
Figure 5.151 Trace conditions dialog box
3. The Violation of task stack access dialog box will be displayed. The rest is the same as you opened it from the Hardware
Break dialog box.

5.14.10 Detecting an OS dispatch

This function becomes valid when a load module including an OS is downloaded. It detects that task dispatch occurred.
(1) Actions taken when an OS dispatch is detected
The following actions can be set:
- Display a warning
Selecting the OS dispatch check box on the Exception Warning page of the Configuration properties dialog box, you can
display a warning in the Status window and in a status bar balloon.
- Set the detection of an OS dispatch as a condition of a hardware breakpoint
- Set the detection of an OS dispatch as a condition of a trace point
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 208 of 229
5. Debugging Functions