Selecting Clock Supply; Clocks - Renesas M16C/64 User Manual

R0E530640MCU00 User's Manual

2.8 Selecting Clock Supply

2.8.1 Clocks

You can choose a clock supplied to the evaluation MCU by the Emulator tab in the Configuration properties dialog box of the
emulator debugger. Table 2.1 shows the clocks and their initial settings.
Table 2.1 Clock supply to the MCU
Clock
Main (X -X )
IN OUT
Sub (X -X )
CIN COUT
Notes on Changing the Clock Supply:
The clock supply can be set by the Configuration properties dialog box when starting up the emulator debugger
or inputting emulator_clock command on the Command Line window.
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 30 of 229
Display of
emulator debugger
Emulator
User
Generate
Emulator
User
IMPORTANT
Description
IC17 mounting oscillator module
Oscillator circuit on the user system
Internal generator circuit
(1.0--20.0 MHz)
Internal oscillator circuit
(32.768 kHz)
Oscillator circuit on the user system
2. Setup
Default setting
Yes
-
-
Yes
-