Table of Contents
Advertisement
R0E530640MCU00 User's Manual
1.4 Specifications
Table 1.5 lists the specifications of the R0E530640MCU00.
Table 1.5 Specifications of the R0E530640MCU00
Applicable MCU
Applicable MCU mode
Maximum ROM/RAM capacity
Maximum operating frequency
Software break
Hardware break
Combination, pass count
Exception event detection
Real-time trace
Trace mode
Trace extract/delete
Real-time RAM monitor
Time measurement
Coverage measurement
Profile
Connection to user system
Emulator power supply
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 20 of 229
M16C/60 Series M16C/64 Group MCUs with 512 KB ROM
Single-chip mode, memory expansion mode, microprocessor mode
1. Internal flash ROM: 8KB+16KB+512KB
0E000h--0FFFFh, 10000h--13FFFh, 80000h--FFFFFh
2. Internal RAM: 31KB
00400h--07FFFh
Power supply voltage: 2.7--5.5V 25MHz (with PLL)
(Emulation memory 0wait: 12MHz, 1wait or more: 25MHz)
4096 points (uses RAM for break point capability before execution)
16 points (Execution address, bus detection, interrupt, external trigger signal)
- Cumulative AND/OR/status transition
- 255 pass counts
Violation
of
access
dispatch/initialization omitted
192bits × 4M cycles
(Address, data, status, CPU status, bus status, target status, task ID, time stamp, 32
external trigger inputs)
Fill until stop/full/point and delay/repeat (free)/repeat (full)
Capture/Do not Capture by events
or
Specified data access instruction extraction/trace extraction before and after point
- 16,384 bytes (512 bytes × 32 blocks)
- Data/last access
- Execution time between program start and stop
- Maximum/minimum/average execution time and pass counts of specified eight
sections
- Count clock: Equal to MCU Clock or 10ns—1.6us
2 MB (256 KB × 8 blocks)
1 MB (128 KB × 8 blocks)
100-pin 0.65mm pitch QFP
100-pin 0.5mm pitch LQFP
Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz)
protection/task
stack
R0E0100TNPFJ00
R0E0100TNPFK00
1. Outline
access
violation/OS
Advertisement
Table of Contents
