Table of Contents
Advertisement
R0E530640MCU00 User's Manual
4.4 Opening an Existing Workspace
Follow the procedure described below to open an existing workspace.
(1) In the Welcome! dialog box, select the radio button titled "Browse to another project workspace" and click the OK button.
Figure 4.10 Welcome! dialog box
(2) The Open Workspace dialog box shown below will appear.
Figure 4.11 Open Workspace dialog box
Specify the directory in which workspaces are created, select a workspace file (extension ".hws") and click the Select button.
(3) The High-performance Embedded Workshop will start, and the state of the selected workspace in which it was saved will
be restored. If the saved state of the selected workspace is one in which it was connected to the emulator, the workspace is
automatically connected to the emulator. If the saved state of the selected workspace is one in which it was not connected
to the emulator and you want to connect it, refer to "4.5 Connecting the Emulator".
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 73 of 229
4. Preparing to Debug
Advertisement
Table of Contents
