Troubleshooting (Action On Error); Flowchart To Remedy The Troubles - Renesas M16C/64 User Manual

R0E530640MCU00 User's Manual

6. Troubleshooting (Action on Error)

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs, visit the Renesas Tools Homepage.
Emulator debugger startup completed
Figure 6.1 Flowchart to remedy the troubles
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 211 of 229
http://www.renesas.com/tools
Turning on emulator
LED display of emulator
Normal
Device setting dialog box
of emulator debugger
Normal
Configuration properties dialog
box of emulator debugger
Normal
Connecting dialog box of
emulator debugger
Normal
Editor window of emulator
debugger displayed
Normal
Not normal
1. Check the connection of power supply cable.
See "2.5 Connecting the Emulator Power Supply".
Not normal/Error displayed
1. Check the operating environment etc. of the emulator
debugger.
See "5.1 Setting Up the Emulation Environment".
2. Reinstall the emulator debugger.
Not normal/Error displayed
See "6.3.(2) Configuration Properties Dialog Box Does Not
Appear at Emulator Debugger Startup".
Not normal/Error displayed
See "6.3.(3) Errors Occur at Connecting Dialog Box.
Error displayed
See "6.3.(4) Errors Occur at Emulator Debugger Startup".
6. Troubleshooting (Action on Error)