Reference Information; Service Access Licence And Services Notification Form; Service Access Licence; Service Notification Form - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
5.

REFERENCE INFORMATION

5.1

SERVICE ACCESS LICENCE AND SERVICES NOTIFICATION FORM

5.1.1 Service Access Licence

VERIPOS correction signals are provided as a chargeable service.
In order to receive this service the user must first arrange a Service Access License
(SAL). This takes the form of a contract which is agreed between the user's company and
the VERIPOS Operations department.
The equipment cannot be used until an enable code is obtained from the VERIPOS
Helpdesk. The Helpdesk is not authorised to issue a code unless an active SAL exists and
its number can be determined. To avoid delays the user should keep a record of the SAL
number associated with his unit.

5.1.2 Service Notification Form

In order to enable or disable the equipment, codes must be obtained from the VERIPOS
Helpdesk. Requests for enable/disable codes should be made using the Service
Notification Form (SNF). This should be submitted, by email, to the VERIPOS Helpdesk
at: helpdesk@veripos.com
The current version of the SNF can be downloaded from the VERIPOS Online support web
site: http://help.veripos.com.
If necessary, enable requests can also be submitted by telephone to the VERIPOS
Helpdesk. See the Contact information section for current phone numbers. Before calling,
please refer to a SNF and ensure that all the required information is available.
Rev No: A4 Page 66