Antenna Voltage - Gnss; Module Reboot - Gnss; Factory Reset - Gnss; Hints - Gnss - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589

2.6.3 Antenna Voltage - GNSS

Antenna power must be toggled On (Home/GNSS/Antenna is off) when the GNSS card is
directly connected to a GNSS antenna. The Antenna power should be toggled off where
the LD6 is connected to a powered signal splitter.

2.6.4 Module Reboot - GNSS

The Module Reboot option with the GNSS menu will perform a reboot of the GNSS card
only (not the entire LD6 receiver).
There will be a loss of positioning while a GNSS module reboot is taking place.

2.6.5 Factory Reset - GNSS

Use only under instruction from a VERIPOS engineer.

2.6.6 Hints - GNSS

Provides hints where available.
Rev No: A4 Page 35