Antenna Voltage - Mf; Module Reboot - Mf; Factory Reset - Mf; Hints - Mf - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
Next use the Manual Tuning arrow on the right to Edit the Frequency and then the Bitrate
for the channel required.
When the Bitrate is entered press Update button then touch Close.

2.7.3 Antenna Voltage - MF

Antenna power must be toggled On (Home/ MF/ Antenna is off) when the MF card is
directly connected to an MF antenna. The Antenna power should be toggled off where the
LD6 is connected to a powered signal splitter.

2.7.4 Module Reboot - MF

The Module Reboot option with the MF menu will perform a reboot of the MF card only
(not the entire LD6 receiver).
2.7.5 Factory Reset – MF
Should only be used under instruction by VERIPOS.

2.7.6 Hints - MF

Provides hints where available.
Rev No: A4 Page 39