Rear Panel - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589

2.3.2 Rear Panel

Previously, a GA-530 GNSS antenna may have been supplied if GLONASS was not
required. The V460 is the standard antenna currently supplied for GNSS signals on an
LD6 regardless of whether GLONASS is required or not.
The Video out connection is only used with Verify-QC and Orion software.
If using a combined L-BAND / GNSS antenna (e.g. V460) connect it to the input to the L-
BAND receiver card. Remove the terminator from the RF out of the L-BAND card and link
the GNSS card RF in to the L-BAND RF out connector, using the lead which is supplied.
Rev No: A4
LD6 rear panel connections
LD6 antenna connection using a combined GNSS & LBAND antenna
Page 16