L-Band Configuration - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.5.1.1 Module Info – L-Band
From the L-Band Status page, press Module Info:
The Module Info screen shows:

Slot – Indicates which LD6 module bay the L-Band card is physically installed in.

Variant – Details of the L-Band card model installed.

SerNo – Serial number of the L-Band card installed.

FWare – Firmware version currently installed on the L-Band card.

Decode – Decoder version currently installed on the L-Band card.

Boot – Bootloader version currently installed on the L-Band card.
L-Band firmware is updated automatically when LD6 software is updated, therefore there
should be no requirements for users to manually upgrade L-Band firmware.

2.5.2 L-Band Configuration

To make changes to the L-Band, go to Home / LBAND / Config.
Rev No: A4 Page 20