Veripos LD6 Operation Manual page 32

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
After changing the PPP solution, the newly selected solution will then have to re-
converge. It is recommended not to change the PPP solution during vessel
operations.
2.6.2.3 NMEAa / NMEAb / NMEAc Configuration
These pages allow the user to select the NMEA position messages required to be output
from the LD6.
NMEAa, NMEAb and NMEAc are configured independently and are all available to output
via COM or LAN interface. All three will output the same position calculation e.g. Apex
specific messages on each can be configured based on the vessel system(s) requirements.
The LD6 will always output the best available position, for example, if the LD6 is configured
to calculate an Apex solution and Apex fails, the output will automatically output the next
best available position e.g. VERIPOS Standard or 3
Use of IALA requires an MF receiver card to be fitted to the LD6.
Use the arrow icons to scroll through the available NMEA messages and touch either
Enable or Disable to ensure the correct message types are used.
Rev No: A4
rd
Party (e.g. IALA or SBAS).
Page 32
2
but