Veripos LD6 Operation Manual page 21

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.5.2.1 Beams
Preparation
To receive VERIPOS corrections select a geostationary satellite beam that covers the area
of operation for the vessel. A chart showing the Veripos service beam names and Global
coverage is in Section 4 Reference information.
Up to date copies and service update information available on VERIPOS online support
system (VOSS) at:
http://help.veripos.com
You need to know the VERIPOS beam(s) that cover the general area of operation for the
vessel.
To ensure correct beam selection when configuring the LD6 use the VeriChart program.
This is a free download from VOSS and allows VERIPOS users to generate their own
regional chart information.
Beam
A chart showing the beam names and coverage is available in the Reference information
chapter – 'Global coverage chart'.
Beam
143.5E
POR
IOR
25E
AORW
98W
AORE
Up to date beam coverage charts are available on VOSS.
Press the Beams button to view or amend the Beam selected. If the correct regional Beam
is shown no edit is required.
Rev No: A4
Coverage
Asia, Australasia, Indian Ocean
East Asia, Australasia, Alaska
Asia, Indian Ocean, East Africa, Persian Gulf,
Caspian Sea
North Sea, Mediterranean Sea, Africa, Persian Gulf,
Caspian Sea
North America, Gulf of Mexico, South America
North America, Gulf of Mexico, South America
North Sea, Mediterranean Sea, Africa
Page 21