Veripos LD6 Operation Manual page 49

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.9.3.3 NMEA Position Output – Via COM
Before configuring any output of an NMEA position, you must have first selected which
NMEA message types are required by the receiving system.
Please refer to Section 4 for details regarding selection of NMEA message types.
Go to Home/ Settings/ I/O and use the arrow icons to navigate to an unused COM port.
Touch Next then use the Up/Down arrow icons to select GNSS in the Source field.
Use the Right arrow to move to the Data field then use the Up/ Down icons to select
NMEAa, NMEAb or NMEAc.
Touch Next then select the required data protocol e.g. RS232 or RS422..
Rev No: A4 Page 49