Ld6 Operation - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.

LD6 OPERATION

The controls for working with the LD6 are all available via the touch screen front panel.
Use the LD6 touch screen to configure the unit.
Description
The LD6 Integrated Mobile Unit (IMU) is used offshore on vessels to provide high precision
Satellite Positioning Services from VERIPOS.
The LD6 can optionally be equipped to run Verify QC software or the Orion DP software.
It can be fitted with modules to receive the following;

GNSS satellite positioning data

L-Band satellite positioning augmentation data from geostationary satellite
transmissions

Optional MF Beacon positioning augmentation data

Optional UHF positioning augmentation data
LD6 IMU's on this software version must have a minimum of 4GB RAM fitted.
The LD6 supports all VERIPOS position augmentation data services.
The LD6 supports switching between high accuracy PPP solutions (subject to settling
before position is output).
When configured the LD6 automatically selects the best available solution for output, with
automatic fall-back to the next best solution.
Multiple messages are supported with configurable outputs of position data from the ports
in NMEA format (V3).
For timing, a ZDA message can be output for use with 1PPS output.
The LD6 supports RS 232 and 422 output from galvanic isolated ports and output to LAN.
Rev No: A4
LD6 IMU
Page 12