Enable \ Diasable Faults - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
4.3

ENABLE \ DIASABLE FAULTS

Fault
Enable indicator shows
red.
Unable to enter an
Access
code.
Rev No: A4
Reason Remedy
Unit
Contact VERIPOS helpdesk for appropriate enable
disabled;
code.
Access
code
Repeat entry of code. Use Quick Guide.
incorrect.
Disconnect unit from power for one minute.
Reconnect and allow to initialise, then repeat entry of
code.
Not Unit needs to receive a beam (LBAND frequency) for the
receiving global work region before it can be enabled / disabled.
LBAND
Ensure LBAND antenna is connected, has a clear view
signal.
of sky to equator.
'Sync' icon
Use the Quick Guide to select and confirm a valid
is Red.
regional satellite beam has been selected for the work
area.
Page 63