Configuration - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589

2.8.2 Configuration

Configuration is accessed from Home/ UHF/ Config.
When amending the UHF receiver card configuration the output of UHF RTCM data is
interrupted.
Amend the Frequency, Channel, Forward Error Correction, Sensitivity and Link Speed
using the onscreen arrows and buttons.
Selection of existing Frequencies against channel numbers can be made if suitable.
Home/ UHF/ Config/ Yes
Use the up/down arrows to select from the pre-entered channel numbers and associated
frequencies.
Rev No: A4 Page 42