Apps - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.10.5.3
Touch these buttons when displayed and follow the instructions to calibrate the
touchscreen.
The Calibrate Screen 2 will only appear when an external monitor has been connected.

2.10.6 Apps

The Apps button is where the on-board applications can be launched:
The Apps icon will only appear when a VGA monitor has been connected to the LD6.
2.10.6.1
This will launch the VERIPOS DP Orion software. Orion will be displayed on the attached
VGA monitor.
Please refer to the Orion Operations manual for further information regarding the use of
Orion. This manual is available at http://help.veripos.com.
2.10.6.2
This will launch the VERIPOS Verify QC software. Verify QC will be displayed on the
attached VGA monitor.
Please refer to the Verify QC for LD6 Operations manual for further information regarding
the use of Verify QC on-board LD6. This manual is available at http://help.veripos.com.
An enabled Verify QC dongle must be installed in one of the LD6 USB ports before Verify
QC will launch.
Rev No: A4
Calibrate Screen 1 / 2
Launch Orion
Launch QC
Page 57