Veripos LD6 Operation Manual page 23

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.5.2.3 Edit L-Band Reference Stations
Once the LD6 is enabled, the VERIPOS reference station RTCM information is available.
The LD6 L-BAND card outputs two data streams of RTCM corrections:-
RTCMa and RTCMb.
These may be configured independently and both may be selected for output on the LD6
COM or LAN ports.
RTCMa is additionally used internally, providing correction information to the LD6 internal
position computation.
Recommendation
On the RTCMa data stream all reference stations should be enabled. The LD6 internal
calculations will determine automatically the best stations for use.
Use RTCMb to provide output of corrections to third party equipment. Depending on the
application it may be desirable for the user to select only the appropriate stations for this
equipment.
The following section describes this process.
Refer to a list of all VERIPOS stations showing their station number, name and region
which can be downloaded from http://help.veripos.com.
To enable or disable station(s):
From the home screen select LBAND/ Config and select RTCMa or RTCMb then touch
Edit.
Use the up/down arrows to highlight the station number and the disable button to remove it
from use.
Rev No: A4 Page 23