Veripos LD6 Operation Manual page 31

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
Touch Close when finished.
2.6.2.2 PPP Config
Use the PPP Config page to set which PPP calculation you wish to output from the LD6.
The available options are Apex or Ultra.
Touch Edit then use the arrow icons to select the desired PPP solution. Press Enter to
confirm the selection and then Close.
The LD6 will need to be enabled for the correct access code in order to be able to output
the selected solution.
Rev No: A4 Page 31