Veripos LD6 Operation Manual page 34

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
Use the Up/ Down arrows to change the values and the Right arrow to change between
the Precision and PPP DQI fields.
Press Enter to confirm the changes then Close.
2.6.2.5 SBAS Config
This page allows the SBAS solution to be enabled or disabled as required. SBAS is
Disabled by default. The page below displays the current SBAS status:
To change SBAS, touch Edit, then use the arrow icons to either Enable or Disable. Touch
Enter to confirm the change followed by Close.
Rev No: A4 Page 34