Use Of External Touchscreen Monitors - Veripos LD6 Operation Manual

Procedure Title: LD6 Operations Manual (B Variant)
File Ref.: AB-V-MA-00589
2.12

USE OF EXTERNAL TOUCHSCREEN MONITORS

A touchscreen monitor can be connected to the LD6. The VERIPOS Orion software can
then be operated using the touchscreen monitor.
Verify QC is not designed to be operated via touchscreen therefore a keyboard and mouse
will be required for operation and configuration of Verify QC.
Touchscreen monitors require both VGA and USB connection to the LD6. VERIPOS
recommend the use of USB 2.0 cables, up to a maximum length of 5 metres.
The LD6 supports the use of NORCO and HATTELAND touchscreen monitors. Refer to
Section 2.10.5 for information on touchscreen display configuration.
Rev No: A4 Page 59