Using The Bypass Switcher Panel - pro bel TX 410 Operator's Manual

Pro-Bel

11.1 Using the bypass switcher panel

1
Press a button on the bypass switcher panel to take that source to
air immediately.
If the old source was the TX 410 PGM output, the TX 410 is
switched from air, so any current audio settings, DSKs, DVE effects
and audio-overs on the TX 410 are no longer transmitted.
If the new source is the TX 410 output, then the sources on the
PGM bus, the audio setting, any DSKs, DVE effects and audio-overs
selected on the TX 410 are cut to air immediately.
HU-TX 410OG
TX 410 operators guide
59