Selecting Multiple Channels - pro bel TX 410 Operator's Manual

TX 410 operators guide

17.1 Selecting multiple channels

1
Press <ASSIGN> to activate the selection controls.
The <ASSIGN> button lights. Channel buttons <1> to <6>are now
active.
2
Press required channel button <1> to <6>.
Pressing an unlit channel button, <1> to <6>causes the button to
light and connects the panel to the corresponding TX Series system
(chassis).
Pressing an illuminated channel button, <1> to <6>causes the
button to be extinguished and disconnects the panel to the
corresponding TX Series system (chassis).
3
Repeat step 2 until the channel buttons lit correspond to those to
be controlled.
4
Press <ASSIGN> to de-activate the selection controls.
Pressing the <ASSIGN> button after chassis selection extinguishes
the button and prevents further selection or deselection of buttons
<1> to <6>.
Note: It is possible to have the panel connected to all sets of electronics
(i.e. All buttons <1> to <6> are lit).
The LCD touchscreen, source assign displays and all lamp tallies reflect
the settings for the leftmost selected system (i.e. the lowest number
channel button lit).
88
Pro-Bel
Issue 2