Monitoring In Multi-Level Environment - pro bel TX 410 Operator's Manual

TX 410 operators guide
8.2

Monitoring in multi-level environment

In multi-level audio systems, it may be necessary to listen to other
audio levels on the PGM, PST and AUX busses, or TX/ return Air feed. A
'soft' key is provided on the Audio setup page on the touchscreen to
switch the required AES level to the Monitor output.
1
Select the required bus to be monitored using the MONITOR
controls
2
From the home screen, press the <AUDIO SETUP> button (chapter
12).
The audio setup screen is displayed.
3
To select the level for monitoring, press the <Mon Lvl x> (shown
as <Mon Lvl 1> above) button until the required audio level is
shown.
The selected level will be routed to the monitor output.
48
Pro-Bel
Issue 2