Taking A Manually Rolled Machine - pro bel TX 410 Operator's Manual

Pro-Bel
3.5

Taking a manually rolled machine

1
Select the required source to the PST bus. Roll the machine manually
by pressing <ROLL>.
The machine is started, as shown on the PST monitor.
2
Press <TAKE> to take the married video/audio to air.
The red PGM source buttons light, corresponding to the sources
pre-selected on PST. The transition is made using the type and
speed shown by the lit transition setup buttons.
HU-TX 410OG
TX 410 operators guide
25