Multi-Level Audio Routing; Viewing The Current Audio Routing - pro bel TX 410 Operator's Manual

Pro-Bel

16 Multi-level audio routing

If the TX 410 system has been set up for multi-level audio, the
<AUDIO RTG> button appears on the home screen. This button
provides access to screens which allow viewing and editing of the audio
(level) routing for each source on the panel.

16.1 Viewing the current audio routing

The view audio routing screen is accessed from the home screen (see
chapter 12) by pressing the <AUDIO RTG> button. It displays the
following:
· Bus selection 'soft' buttons.
· A diagram of the current routing for the selected bus/source,
showing inputs (tracks) on the left, routed to outputs (channels)
on the right. Each channel can receive only one input at a time,
however a single input can be routed to multiple channels.
· The name of the input currently selected on the bus (shown
above the routing diagram).
Buttons on the view audio routing screen include:
<PGM>, <PST>, <AUX1> - used to select the bus.
<EDIT> - used to display the edit audio routing screen (see chapter 16).
HU-TX 410OG
TX 410 operators guide
81