Table of Contents
Advertisement
TX 410 operators guide
1
From the view audio routing screen, press the <EDIT> button (see
section 16.1).
The edit audio routing screen is displayed with the AUX1 bus
selected. The name of the currently selected source is shown in a
box beneath the routing diagram.
2
To view and change the audio routing for a different bus, press
either <PST> or <PGM>, as required.
The source name for the bus shows in the box.
3
To view and edit the audio routing for a source other than the one
shown, press the appropriate source selection button in the row on
the lower console.
Caution: Selecting sources on the PGM bus will affect the
programme output.
4
To change the selected inputs and channels, use the left and right
shaft encoders respectively.
The highlighted inputs and channels show the selected
input/channel combination.
84
Pro-Bel
Issue 2
Advertisement
Table of Contents
