Using Audio-Overs; Setting The Audio-Over Fade Rate - pro bel TX 410 Operator's Manual

TX 410 operators guide

6 Using audio-overs

Four audio-overs are provided on the TX 410, enabling sound to be
added over the on air programme audio. The audio-over control section
is on the right hand side of the panel.
Audio-overs can be cut or faded to or from air and can be set to follow
the next audio or DVE transition. Only one audio-over can be on-air at a
time.
6.1

Setting the audio-over fade rate

1
From the home screen, press the <AUDIO SETUP> button (see
chapter 12).
The audio setup screen is displayed.
2
To select the over fade rate, press the <OVER rate> button (shown
as <Over Slow> above) until the required speed is displayed.
The display toggles between <SLOW>, <MED>, and <FAST>.
Note: The rates are the same as the main video and audio transition
rates. The over adopts the same rate as the audio PST/PGM transition
when set to follow.
38
Pro-Bel
Issue 2