Taking An Audio-Over To Air - pro bel TX 410 Operator's Manual

Pro-Bel
6.4

Taking an audio-over to air

Any one of the four available Audio Overs can be cut or faded to air
independently of a PGM Audio transition.
If the <CUT> button is lit, the currently selected Over input is already
on-air.
If the yellow <FOLLOW> button is flashing, the selected Over input is
set to follow the next audio or DVE transition (section 6.6).
To take an over to air
1
Select the required Over input and set the PGM and OVER levels if
required (sections 6.1 to 6.3).
2
Press the <CUT> button.
The input is cut to air and the <CUT> button lights, indicating the
Over is on-air.
To fade an over to air
1
Select the required Over input and set the PGM and OVER levels if
required (sections 6.1 to 6.3).
2
Press the <FADE> button.
The Over and PGM levels fade to the preset levels. The <FADE>
button is lit while a fade is in progress. If it is necessary to
complete the fade early, press <CUT>.
HU-TX 410OG
TX 410 operators guide
41