pro bel TX 410 Operator's Manual page 82

TX 410 operators guide
1
From the home screen, press the <AUDIO RTG> button.
The view audio routing screen is displayed, with the AUX bus
selected. The name of the currently selected source is shown above
the routing diagram.
2
To view audio routing for a source on a different bus, press either
<PST> or <PGM>, as required.
The source name for the bus is shown in the box.
3
To view the audio routing for a source other than the one shown,
press the appropriate source button in the selected row.
The source name above the routing diagram will reflect the new
selection.
Caution: Selecting sources on the PGM bus will affect the
programme output.
4
To modify the audio routing for the selected source, press <EDIT>
to move to the edit audio routing screen (see section 15.2).
If the audio routing does not need to be modified, press <HOME> to
display the home screen.
82
A u d i o R o u t i n g - V T 1 A u d i o R o u t i n g - V T 1
PGM PGM
A1 A1
A2 A2
A3 A3
A4 A4
PST PST
A5 A5
A6 A6
A7 A7
A8 A8
AUX AUX
CHANNEL 1 CHANNEL 1
CHANNEL 2 CHANNEL 2
CHANNEL 3 CHANNEL 3
CHANNEL 4 CHANNEL 4
Edit Edit
CHANNEL 5 CHANNEL 5
CHANNEL 6 CHANNEL 6
CHANNEL 7 CHANNEL 7
CHANNEL 8 CHANNEL 8
Home Home
Pro-Bel
Issue 2