Adjusting Audio Levels - pro bel TX 410 Operator's Manual

Pro-Bel

15 Adjusting audio levels

The audio (gain) setup screen is used to specify the audio parameters
for each source available to the PGM, PST, and AUX busses. The gain can
be set for each source; either as a married signal – where both channels
are set to the same gain value, or split – providing individual gain
adjustment for each channel. For single level audio setups, mono or
stereo source selection can be specified, with phase reversal on channel
B. In systems where the TX 410 is set up for multi-level audio operation,
similar adjustments can be made for each level.
The audio (gain) setup screen is accessed from the home screen (see
chapter 12) by pressing the <AUDIO SETUP> button on the right. It
displays the following:
· Bus selection button.
· The name of the source currently selected on the active bus.
· Audio gain display showing the audio gain setting for the
currently selected source.
To return to the home screen, press <HOME>. The Level select button,
shown as <Level 1> above, changes the display between levels within a
multi-level system.
HU-TX 410OG
TX 410 operators guide
77