pro bel TX 410 Operator's Manual page 85

Pro-Bel
5
Pressing the <CON> button connects the selected input/channel
combination.
The diagram updates to show the new connection. The example
shows A1 is now routed to CHANNEL 1 and CHANNEL 3.
6
To reverse the last connection made in this editing session, press
<UNDO> immediately after pressing <CON>.
<UNDO> will only work if the last button pressed was the <CON>
button. Press <HOME> once to display the view audio routing
screen. Press <HOME> again to return to the home screen.
HU-TX 410OG
TX 410 operators guide
85