Stop Watch And Timer Modes - pro bel TX 410 Operator's Manual

TX 410 operators guide

12.3 Stop watch and timer modes

The timer modes shown on the display are configurable. For details of
how to configure them please refer to the technical manual. The
subsequently available modes are either stop watch (TOD) or timer
mode.
Each timer mode has a dedicated set of control pushbuttons, available
on the timer home page, these are shown below.
Stop watch mode (TOD)
In stop watch mode the time of day display (HH:MM:SS) is provided in
24 hour format, as illustrated. This time is derived by the station TC
input. If no input is present, the clock will free run.
The stop watch is locked to the station TC input. Due to this feature a
count started half way through a second will count that half second as a
second to keep in step with the station TC.
66
Pro-Bel
Issue 2