Taking A Dve Sequence To Air; Taking A Dve Sequence From Air - pro bel TX 410 Operator's Manual

TX 410 operators guide
5.3

Taking a DVE sequence to air

1
Select the sequence to take to air (refer to section 5.1).
2
Press the red <DVE> button.
The selected DVE move will be activated on air. The <DVE> button
lights up as the DVE move is in action. Once the move is
completed, the <DVE> button flashes until the DVE is taken off air.
5.4

Taking a DVE sequence from air

The DVE move can be taken off air by either:
1
Pressing the red <DVE> button whilst lit.
The selected DVE move will be taken off air by completing the
reverse move. The <DVE> button lights up as the DVE move is in
action and then is extinguished once the move is off air.
2
Activating a PST/PGM transition. See chapter 3.
Caution: The selected DVE move will be cut off air.
36
Pro-Bel
Issue 2