Selecting Wipe Patterns; Setting Wipe Pattern, Direction And Softness - pro bel TX 410 Operator's Manual

TX 410 operators guide

13 Selecting wipe patterns

There are ten wipe patterns available to the TX 410 which can be
selected from the wipe pattern page. In addition, the edge softness and
direction of the wipe can also be set.
The default setting for the wipe pattern is:
· wipe pattern selection = left to right horizontal wipe
· wipe softness = 0%
· wipe softness = OFF
· wipe direction = normal (forward)
When control is by an automation system (e.g. Pro-Bel Compass) the
displayed wipe pattern changes to reflect the pattern currently selected
by the automation system.
13.1 Setting wipe pattern, direction and
softness
1
From the home screen (see chapter 12), press the
<WIPE PATTERN> button.
The wipe screen is displayed with the current wipe pattern shown
in the lower right corner of the screen.
70
Pro-Bel
Issue 2