Holding An Automated Transition; Taking An Automated Transition - pro bel TX 410 Operator's Manual

Pro-Bel
3.7

Holding an automated transition

1
If necessary, a transition that is scheduled and controlled by an
automated presentation system can be delayed by pressing
<HOLD>.
The <HOLD> button lights. The on-air sources do not change (that
is, the next transition is not taken) until <HOLD> is pressed again
to release it and the Pre-Roll & Take button is pressed.
3.8

Taking an automated transition

1
If necessary, a transition that is scheduled and controlled by an
automated presentation system can be taken to air early by pressing
<PRE-ROLL & TAKE>.
The preset source is taken to air.
HU-TX 410OG
TX 410 operators guide
27