Adjusting The Audio-Over Levels - pro bel TX 410 Operator's Manual

TX 410 operators guide
6.3

Adjusting the audio-over levels

Warning: If the <CUT> button is lit, an audio-over is on-air
and the audio-over level controls will affect the programme
audio output.
1
Select an audio-over source by pressing one of the four white
buttons, <OVER 1> to <OVER 4>.
The selected over button will light and the indicators around the
<OVER> and <PGM> controls will light to provide an indication of
the preset levels for the selected input.
2
To adjust the level of audio-over, turn the <OVER > control to the
required level (usually maximum, fully to the right). On maximum
setting there is no level reduction of the audio-over level.
The indicator around the control provides a visual feedback of the
level.
3
To adjust the programme level, turn the <PGM > control to the
required level.
As with the Over control, the indicator around the control
provides visual feedback of the new level.
40
Pro-Bel
Issue 2