Table of Contents
Advertisement
Pro-Bel
2.10 Video/audio monitoring
A separate auxiliary monitoring bus, AUX, on the router can be
controlled directly from the TX 410 (see chapter 7) and provides the
option for split or married video and audio selection.
For audio monitoring (see chapter 8), a single output, allows selection of
PGM, PST, AUX or an off-air/external source and offers comprehensive
audio monitoring facilities. The audio level can be cut or dimmed via
dedicated buttons, with a variable control for the overall level.
Where the TX 410 has provides multi-level audio control, a 'soft' button
on the Audio Setup page <Mon Lvl X> enables selection of the required
audio level to the monitoring system output.
2.11 Machine control
The TX 410 allows control of connected machines (for example, VTRs)
either directly, or via an external router through buttons on the control
panel.
Operation is depends on how the TX 410 has been installed, with the
buttons dedicated either to two directly connected machines or they
can be connected to an external RS422 router, allowing control of up to
12 routed machines.
2.12 Bypass switcher control
Two configurable sets of pushbuttons in the top left corner of the panel
can be set to provide control of an external, independent, 8 x 1 bypass
switcher.
HU-TX 410OG
TX 410 operators guide
15
Advertisement
Table of Contents
