pro bel TX 410 Operator's Manual page 67

Pro-Bel
When stop watch mode is selected, the current count is displayed along
with three push button controls for the stop watch, as illustrated. The
stop watch can count up or down (from a preset value) and can be reset.
The count down preset value is selected using the left hand shaft
encoder to set the minute (MMM) value, and the right hand shaft
encoder to set the second (SS) value.
The stop watch once started counts continually until terminal count,
and is not affected by display pages being changed.
· A toggle push button provides <COUNT> indication. On system
startup the stop watch is shown as stopped, after which it always
displays the current operational state as set by the operator. The
button is highlighted when running. When the stop watch reaches
terminal count (999:59 or 000:00) the count state is changed
from start to stop. The timer can also be started and stopped
from the audio monitoring home page by pressing the timer
indicator MMM:SS
· A toggle push button provides <UP> and <DOWN> indication. On
system startup the stop watch is shown as <UP>, after which it
always displays the current operational state as set by the
operator. When the stop watch reaches terminal count (999:59 or
000:00) the count direction indication remains unchanged.
· A push button provides stop watch <RESET>. If selected while
counting up the count is reset to zero and the count continues. If
selected while counting down, the preset count down time reset
to zero and the count stops.
HU-TX 410OG
TX 410 operators guide
67