pro bel TX 410 Operator's Manual page 65

Pro-Bel
· The <WIPE PATTERN> button shows the currently selected wipe
pattern graphic and allows entry to the wipe pattern selection
page. When control is from an automation system (e.g. Pro-Bel
Compass) the displayed wipe pattern changes to reflect the
current setting defined by the automation system.
· <DSK> allows entry to the downstream keyer (DSK) setup page,
from here the clip and gain settings for both of the downstream
keyers can be adjusted.
· <AUDIO SETUP> allows entry to the audio gain setup page, from
here the levels for each of the audio sources, and the over fade
rate can be set.
· <DVE SEQ n> allows entry to the DVE selection page, allowing
the DVE sequence to be selected and previewed.
· <AUDIO RTG> this page is only available for multi-level audio
systems and allows entry to the audio channel routing viewing
and editing pages.
· <CONFG> allows entry to the system configuration menu pages.
To access the configuration pages. Entry to these pages requires a
PIN code. For details refer to the technical manual.
HU-TX 410OG
TX 410 operators guide
65