4. Administration
16. Press .
Press .
a)
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit sounds a test tone
on the keypad sounders. Check
that you can hear them.
Press again to turn the keypad
b)
sounders off.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
17. Press when you have finished
this test.
18. Press to leave the siren test
menu.
Keypad
1.
Make sure the display shows the
standby screen.
2.
Press
.
3.
Key in your access code (or
present a tag).
Press until you see:
4.
Press .
5.
The display shows:
Press until you see:
6.
Press .
7.
This display tells you to press any
Page 52
i-on16