Eaton i-on16 Administrator's And User Manual page 76

4. Administration
Press .
8.
9. EITHER
Press the button on the remote
control that you wish to program.
Hold the button down until you
see the transmit LED flash.
Note: You cannot reprogram the unset
key on an i-fb01 remote
control.
Only the "*" button (Part set) is
available on a FOB-2W-4B.
The keypad gives a double
"beep" confirmation tone. The
display shows the identity and
owner of the remote control, and
the button you pressed. Go on to
step 10.
OR (if you do not have the remote in
your possession)
a) Press .
The display presents a list of the
registered remote controls and
their users.
Press  or  to show the
b)
remote control you want to edit.
Press  to select it.
c)
The display shows the first button
on the remote control.
Press  or  to show the button
d)
you wish to re-program.
Press  to select the button.
e)
The bottom line shows:
Note: You cannot reprogram the unset
key on an i-fb01 remote
control.
Only the "*" button (Part set) is
available on a FOB-2W-4B.
Page 70














i-on16