Eaton i-on16 Administrator's And User Manual page 47

i-on16
If you are a Normal User:
Press .
6.
Press  until the display shows:
7.
Press .
8.
The display asks you to press one
of the buttons on the remote
control or two-way keyfob.
Note: If you already have a device
allocated to you then the screen
will display "Delete Remote?".
See page 43.
9. Press any button on the device
that you wish to register. Hold the
button down until you see the
transmit LED flash.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit learns the identity
of the device and links it with your
access code.
If the control unit has already
learned that device then you will
hear a low tone and the display
tells you that the device is already
in use.
If you do not wish to register a device press .
If you have a device and want to know who it belongs to then use the Test -
Remotes menu option, see page 49 .








followed by:


4. Administration
Page 41