Eaton i-on16 Administrator's And User Manual page 74

4. Administration
hours or minutes are "9" or less
then key in a leading zero. For
example: six minutes past seven in
the morning will be "07/06".
24. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
Note: If you do not wish the output to switch on and off at a set time
then leave the "On Time" and "Off Time" options set to
"00:00".
To Program Days Of The Week for Latched Outputs
In addition to specifying an On and Off time during the day for a latched
output, you can also specify which day of the week that the output should
operate on.
First make sure that the output you wish to use is programmed as Latched
= Yes (see steps 1 to 16 starting on page 64). Then make sure that you
have specfied On and Off times (see steps 17 to 24 starting on page 67).
25. Press  until the display shows:
26. Press .
The bottom line of the display
shows "Sunday" and "Yes" if the
output will operate on that day, or
"No" if the output will NOT operate
on that day.
27. Press  or  to change the "Yes"
to a "No" or the "No" to a "Yes". For
example:
28. Press  repeatedly to show the
other days of the week, for
example:
29. Press  or  to change the the
"No" to a "Yes" for each day on
which you want the output to
operate.
Page 68










i-on16