Setting The Date And Time - Eaton i-on16 Administrator's And User Manual

i-on16
tone every time a detector with the
"Chime" attribute is triggered.
Press .
7.
The status of the Chime facility
changes each time you press .
Press  when you have finished
8.
making changes.

Setting the Date and Time

You will need to re-program the date and time if the control unit loses
power for an extended time, and the battery is exhausted.
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  until you see:.
4.
Press .
5.
The bottom line of the display
shows:
Press  until the display shows:
6.
Press .
7.
The top line of the display shows
"Set the date" and the bottom line
shows the current date in number
format (day/month/year). The day
is highlighted.
8. Key in the correct date. Use the
format dd/mm/yyyy. If the days or
months are "9" or less then key in a
leading zero. For example: the first
of March will be 01/03/2010.
4. Administration




















Page 63