i-on16
10. Choose either Set or Unset, as
follows:
a) Press .
In the example on the right, the
button is currently programmed
to unset.
b) Press to change the bottom
line between Set or Unset:
c) Press .
The bottom line of the display
now shows the first item in a list
of setting or unsetting options
that you can apply to the
selected button.
The options available are:
Part Set
Full Set
Unset
Note: Ask your Installer if the entry timer needs to be running before a
user can unset using a remote.
11.
Choose what setting (or unsetting) option that you wish to
apply, as follows:
a) Press or . until the bottom
line of the display shows the option
you want.
b) Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
12. Press repeatedly to leave the
menu when you have finished.
Part sets the system.
Full set the system.
Unset the system.
4. Administration
Page 71