Eaton i-on16 Administrator's And User Manual page 41

i-on16
Press  .
7.
The bottom line of the display
shows the first in a list of the users
already programmed into the
control unit. If the user already has
a name programmed it will appear
on the bottom line.
Press  or  to display the user
8.
you wish to edit.
(Alternatively, if you already know
their user number, you can key that
in and the display will show that
user immediately.)
Press  .
9.
The bottom line shows:
10. Press .
The display shows the current
name given to the user, and places
a cursor at the beginning of the
name.
11. Key in the name from the keypad.
See Editing Text on page 32.
12. Press  when finished.
The keypad gives a double "beep"
confirmation tone.
The display will show the name in
menus and in the log when the
user sets, unsets or resets the
system.
User Types
Use this option to change a user's Type.
Note: You cannot change the Type of a Master User.
1. Make sure the display shows the
standby screen.














4. Administration
Page 35