Turning Outputs On/Off - Eaton i-on16 Administrator's And User Manual

i-on16

Turning Outputs On/Off

You can operate the outputs from the keypad, as well as by using a remote
control (provided the installer has assigned some outputs to you). To
operate an output:
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  until you see:.
4.
Press .
5.
The display shows the first in a list
of the outputs that are available to
you.
Note that the outputs may be
programmed with a name, for
example "PORCH LIGHT".
Press  until the display shows the
6.
output you wish to operate:
Press  to change the state of the
7.
output.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
Note: Outputs connected to radio output
modules may take several seconds to
change state.
Press .
9.
The display returns to the "Outputs
On/Off" menu, and the control unit
operates the selected output.
4. Administration
















Page 81